post by :s.narno
Power supply is a supplier of power contained in the personal computer, Sagat peranananya important because it is a power source that provides electricity supply to all components that exist in the personal computer. But what happens if the power supply that we use no electricity supply or no function. This is a simple way to know is still berfungsikah power supply or is damaged.
1. Unplug all power supply power cord that connects to the motherboard, hard drives, optical drives, and others. While the power cable that is connected between the power supply with electrical power should not be removed.
2. Look for a piece of cable that will be used as a conductor.
3. Connect both ends of the wire with a hole in the power supply connector, cable connector hole exactly on the green and black color. If the fan behind the power suppy turned, then the power supply is certainly still in good condition. If the power supply fan is not spinning most likely your power supply is damaged and must be serviced or replaced.
Easy - I hope can help
Senin, 21 Maret 2011
Sabtu, 19 Maret 2011
When Mouse Damage
Post by s.narno
These tips are given to friends who are urgent in using computers but the mouse is in use is broken, do not you confused as well when suddenly the mouse is broken but we really need a mouse to move the computer cursor.
One alternative, if the mouse is broken is to use the keyboard to replace the mouse, move the cursor with the keyboard. There are several steps that we need to make the keyboard into the mouse or in other words we can move the cursor / pointer without a mouse but with keyboard.
His ways are:
1. Press the ALT key (left) + Shift (left) + NumLock and select the setting by using the direction arrows on the keyboard, in this way then a mouse settings will appear.
2. then move to writing the option "use mousekey", then if we have already elected him mencetang, well, how to check the "use mousekey" we can do by pressing the "M" when "use mousekey" in the highlight. it will automatically be checked, because it is impossible to check it with the mouse, because we assume we're broken mouse.
3. Completed, then we can use our keyboard sebgai mouse, to move his use 1-9.
These tips are given to friends who are urgent in using computers but the mouse is in use is broken, do not you confused as well when suddenly the mouse is broken but we really need a mouse to move the computer cursor.
One alternative, if the mouse is broken is to use the keyboard to replace the mouse, move the cursor with the keyboard. There are several steps that we need to make the keyboard into the mouse or in other words we can move the cursor / pointer without a mouse but with keyboard.
His ways are:
1. Press the ALT key (left) + Shift (left) + NumLock and select the setting by using the direction arrows on the keyboard, in this way then a mouse settings will appear.
2. then move to writing the option "use mousekey", then if we have already elected him mencetang, well, how to check the "use mousekey" we can do by pressing the "M" when "use mousekey" in the highlight. it will automatically be checked, because it is impossible to check it with the mouse, because we assume we're broken mouse.
3. Completed, then we can use our keyboard sebgai mouse, to move his use 1-9.
Jumat, 18 Maret 2011
detect keybord keys errors
Damage to the keybord keys often become obstacles and hinderour work, if we know the damage and fix it yourself may not be aconstraint. This problem is sometimes we think we are trivial but itwould be a problem when we can not repair damage to thekeybord.
As for example when the job is being stacked arrive - we arrivedjust keybord broken and temporary jobs we have to finish on time.For this kind of problem the first thing we do in an emergency is touse the on-screen keybord that has been provided by the windows operating system
The kenada at the moment we use on-screen keybord is unfamiliarwe use it than we are using manual keybord. But it is very helpfulwhen we finish an urgent job while we manually keybord damaged.
ntuk activate the on-screen keyboard click Start-AllPrograms-Accessories-Accessobility-On-Screen Keyboard. Thento activate the desired key number then click the Keyboard menuand select the desired number key.
As for example when the job is being stacked arrive - we arrivedjust keybord broken and temporary jobs we have to finish on time.For this kind of problem the first thing we do in an emergency is touse the on-screen keybord that has been provided by the windows operating system
The kenada at the moment we use on-screen keybord is unfamiliarwe use it than we are using manual keybord. But it is very helpfulwhen we finish an urgent job while we manually keybord damaged.
ntuk activate the on-screen keyboard click Start-AllPrograms-Accessories-Accessobility-On-Screen Keyboard. Thento activate the desired key number then click the Keyboard menuand select the desired number key.
motherboards damaged
motherboard is the circuit board on which electronic components are connected such as microprocessors and memory (RAM) along with other controller chips and commonly abbreviated to mobo said.
How to detect if there is damage and repair motherbord
The first step check the power supply in a state of the power cord from the power supply off, disconnect the cable socket mounted on Mainboard Atx1. Once separated, attach the power cord back in, connect / shortkan green wire with black cable, check whether the power supply fan spinning? If the rotating means good power supply. Remove the cable connections and reattach the cables were Atx1 to the motherboard.
If it ensures that the Power Supply is no problem then the next step check the Clear CMOS Jumper, whether in Clear or Free position, usually when a new motherboard, the position of the CMOS jumper on the Clear position. IC Chipset check whether too hot or normal in a way to make sure whether the IC chipset has been connected properly.
Cleaning motherbord from dust and dirt, those with heart unloading motherbord motherbord make sure that is correct - really clean and put back in place. Apart pairs ascertained motherbord components power cable is not connected to the mains.
How to detect if there is damage and repair motherbord
The first step check the power supply in a state of the power cord from the power supply off, disconnect the cable socket mounted on Mainboard Atx1. Once separated, attach the power cord back in, connect / shortkan green wire with black cable, check whether the power supply fan spinning? If the rotating means good power supply. Remove the cable connections and reattach the cables were Atx1 to the motherboard.
If it ensures that the Power Supply is no problem then the next step check the Clear CMOS Jumper, whether in Clear or Free position, usually when a new motherboard, the position of the CMOS jumper on the Clear position. IC Chipset check whether too hot or normal in a way to make sure whether the IC chipset has been connected properly.
Cleaning motherbord from dust and dirt, those with heart unloading motherbord motherbord make sure that is correct - really clean and put back in place. Apart pairs ascertained motherbord components power cable is not connected to the mains.
Langganan:
Postingan (Atom)