motherboards damaged

motherboard is the circuit board on which electronic components are connected such as microprocessors and memory (RAM) along with other controller chips and commonly abbreviated to mobo said.

How to detect if there is damage and repair motherbord

The first step check the power supply in a state of the power cord from the power supply off, disconnect the cable socket mounted on Mainboard Atx1. Once separated, attach the power cord back in, connect / shortkan green wire with black cable, check whether the power supply fan spinning? If the rotating means good power supply. Remove the cable connections and reattach the cables were Atx1 to the motherboard.

If it ensures that the Power Supply is no problem then the next step check the Clear CMOS Jumper, whether in Clear or Free position, usually when a new motherboard, the position of the CMOS jumper on the Clear position. IC Chipset check whether too hot or normal in a way to make sure whether the IC chipset has been connected properly.

Cleaning motherbord from dust and dirt, those with heart unloading motherbord motherbord make sure that is correct - really clean and put back in place. Apart pairs ascertained motherbord components power cable is not connected to the mains.